Driveway Paving in Stoney Creek, Ontario | Pro Pavement Asphalt Contractors

Driveway Paving in Stoney Creek

Perched at the foot of the Niagara Escarpment, Stoney Creek endures sub-zero nights and rapid thaws that drive water into pavement pores and freeze them solid. Our high-density HL-3A asphalt mix is installed at 160 °C over a laser-graded 200 mm Granular-A base, delivering an asphalt driveway that resists frost-heave, plow damage, and heavy traffic.

From the historic core around King Street East and Fruitland Road to the lakeside pockets of Winona, homeowners rely on Pro Pavement—your local asphalt paving experts serving Stoney Creek and the greater Hamilton area—for durable driveway paving, resurfacing, and repairs.

Our Commitment to Stoney Creek Driveway Paving

Downtown & Fruitland: Tight setbacks and mature maples require careful grading. We deploy compact pavers, hand-tamped edges, and root-guard boards to preserve canopy cover and streetscape character.

Winona & Lakeshore Park: Waterfront properties battle moisture and sediment. We install a 65 mm surface course over a 225 mm base to prevent ruts from SUVs, trailers, and seasonal flood runoff.

Escarpment Rim & Upper Stoney: Steep pitches shed water fast—yet spring melt pools at garage thresholds. A 2% cross-fall and perforated edge drains route runoff safely to storm inlets.

Permits & Regulations: Since Stoney Creek is part of the City of Hamilton, any driveway widening or new curb-cut requires a Hamilton Access Permit. We handle locates and submissions—no extra trips to City Hall.

Why Asphalt Suits Stoney Creek

Handles 30+ freeze–thaw events annually with minimal cracking
Faster and less expensive to install or refresh than concrete
Dark asphalt absorbs solar heat, melting snow quicker on shaded streets
Warm-mix options reduce odour and carbon footprint

Paving Process — What to Expect

1. On-Site Consultation & Quote: Laser-precision measurements, slope checks, and an itemized proposal.

2. Utility Locates & Permits: We coordinate Ontario One Call and Hamilton permit paperwork for you.

3. Excavation & Base Build-Out: Remove existing material to approximately 300 mm; install and laser-grade 200–225 mm Granular-A.

4. Compaction & Proof-Roll: Twin-drum rollers achieve 98% Proctor density; proof-roll verifies stable support.

5. Hot-Mix Placement: HL-3A asphalt arrives at approximately 160 °C and is machine-laid in a seamless pass; crews hand-trim edges.

6. Finish Roll & Edge Seal: Final steel roll yields a uniform mat; edge seal prevents ravel and weed intrusion.

7. Clean-Up, Walk-Through & Warranty: We clear the site, review the work with you, and hand over your care guide.

Why Choose Pro Pavement in Stoney Creek